LED lighting systems have a significant impact on our lives with their energy efficiency, compactness, reliability, and longer lifetime. In addition to domestic, industrial, and street lighting, they also serve as effective architectural lighting. Pulsed LED power supplies are used to power single or groups of power LEDs that require a regulated output current. No matter how the input voltage fluctuates, the output parameters will not change. This quality makes them particularly suitable for settlements with unstable voltages.
S-3000-30switching power supply product features:
(1) Affordable price and high reliability
(2) High efficiency and low working temperature
(3) With short circuit and overload protection
(4) Soft start current effectively reduces AC input impact
S-3000-30 AC/DC power supply selection tips:
Power must be based on consumer power and load type:
(1) When the equipment is used in conjunction with inductive load appliances, the power must be 3 to 5 times the load power consumption! (Fluorescent lamps, electric motors, pumps, air conditioners, refrigerators, freezers, etc.).
(2) When the device is used for users of capacitive loads, the selected power must be 5 to 10 times larger than the power consumption of the load! (pulse chargers, LED drivers, pulse power supplies, etc.).
(3) The nominal power of the equipment must be 20-30% higher than the consumer's load capacity under active loads (heaters, electric ovens, stoves, stoves, incandescent lamps, etc.). This is due to the high starting current of the load. When the load is turned on and during repeated short-duration modes, the load significantly exceeds the nominal parameters specified in the load characteristics for short periods.
Kindly note that if these instructions are not followed, the unit may be overloaded and stop functioning, and the warranty does not cover the damage. To correctly select the power of the device, it is recommended to consult a specialist. The output voltage of the switching power supply is adjustable and can also be customized by customers. If you need other output voltages, please contact us.
Small size, high efficiency up to 88%, greatly saving energy, stable work, high reliability.
S-3000 3000W Switching Mode Power Supply | ||||
project | Technical index | |||
DC voltage | 24V | 28V | 30V | 60 |
Rated current | 125A | 107A | 100A | 50A |
Rated power | 3000W | 3000W | 3000W | 3000W |
Ripple and noise ① | <150mV | <240mV | <240mV | <240mV |
Voltage accuracy | ±1% | |||
Output voltage regulation range |
±100% | |||
Load adjustment rate | <±1.2% | <±1% | <±0.5% | <±0.5% |
Linear adjustment rate | <±1% | |||
Voltage range | 180-264VAC47Hz~63Hz; | |||
Efficiency (typical)② | >82% | >84% | >86% | >87% |
Working current | 220VAC: | |||
Impulse current | / | |||
Start, rise, hold time | 200ms、50ms、20ms:230VAC | |||
overload protection | 105%-135% type:Constant currentoutput+VODrop to undervoltage point Cut off output reset:From new power |
|||
Overvoltage protection | ≥115%-145% Time Close output | |||
Short circuit protection | Close output | |||
Over temperature protection |
RTH3:Fan often turns,≥90℃Close output | |||
Working temperature and humidity |
-10℃~+50℃;20%~90RH | |||
Storage temperature and humidity |
-20℃~+85℃;10%~95RH | |||
Withstand voltage | input-output:1.5KVAC input-Shell:1.5kVAC output-Shell:0.5KVAC 1 minute | |||
Leakage current | input-output 1.5KVACTime <6mA | |||
Leakage current | input-output 220VACTime <1.5mA | |||
lsolation resistance | input-output,input-Shell,output-Shell:500VDC/100MΩ | |||
size | 314*90*100mm | |||
Net weight/gross weight |
6kg/6.3kg |
Comentario
> Cómo regula el voltaje una fuente de alimentación conmutada?
El voltaje de salida de la fuente de alimentación conmutada se ajusta según el voltaje de suministro y el tamaño de la carga. En la mayoría de los casos, el voltaje de salida de una fuente de alimentación conmutada generalmente debe ajustarse para cumplir con los diferentes tipos de requisitos de carga.> ¡Zhejiang Junlin Electric Technology Co., Ltd. se une a Taobao y Tmall de Alibaba para exponer en la Exposición de Automatización Industrial de Shanghai 2023!
¡Zhejiang Junlin Electric Technology Co., Ltd. se une a Taobao y Tmall de Alibaba para exponer en la Exposición de Automatización Industrial de Shanghai 2023!> Solución de fuga de energía de conmutación
El problema de las fugas al cambiar la fuente de alimentación es un problema común en el uso de aparatos eléctricos, que no solo causará riesgos de seguridad, sino que también reducirá la estabilidad y la vida útil del equipo. Cuando utilizamos una fuente de alimentación conmutada, a menudo nos encontramos con el problema de fugas en el extremo de salida; para resolver este problema, debemos analizar las causas de las fugas y las soluciones.> Cuáles son las aplicaciones de las fuentes de alimentación Carril DIN?
Este artículo proporcionará una descripción detallada de la amplia gama de aplicaciones de las fuentes de alimentación para ferrocarriles DIN en diversas industrias, al tiempo que destacará sus destacadas ventajas. Nuestro objetivo es demostrar por qué las fuentes de alimentación en carril DIN son la solución preferida para una generación de energía estable.+86-18968803336
GET A QUOTE